Home> Industry Information> Paint glass maintenance paint glass features

Paint glass maintenance paint glass features

February 10, 2023

Painted glass is a highly expressive decorative glass. The so-called coating, also known as back coating, is applied by spraying, roller coating, screen printing or drenching. The painted glass sliding door is mainly painted on the back of the glass and baked in an oven at 30-45 degrees for 8-12 hours. The following editor will introduce the maintenance of painted glass and the characteristics of painted glass.

Paint glass maintenance

1. During the use of painted glass, wipe the surface of the door panel with a wet rag, because the integrity of the paint film may be damaged and the paint film may crack.
2. During the use of the painted glass, the impact on the door should be avoided as much as possible. The hardness of the paint film of high-quality painted glass is about 2H, that is, the door surface with a weight of 10 kg may have pits, and the paint film of the door will not fall off in a large area;
3. The paint film of painted glass panel will change color due to high temperature, and its fire resistance is poor. Therefore, during use, avoid direct sunlight on the door panel 6: During use, it is difficult to avoid smoke in the kitchen. When there is smoke or oil on the surface of the entire cabinet door, you can wipe it with detergent and clean it with clean cotton cloth, detergent: water=1:10.

Painted glass features

1. Water, acid and alkali resistance
2. Use environmental protection coating to ensure health and safety
3. Strong adhesion, not easy to fall off
4. Superior anti-skid performance
5. UV resistant, anti-aging color aging
6. Strong color selectivity
7. Strong weather resistance and strong compatibility of structural adhesive
8. Strong stain resistance, easy to clean

Painted glass thickness

Because the quality of painted Home Decor glassware is relatively large, the thickness can usually be guaranteed. The thickness of individual Mouthblown glass varies according to its size. For example, if the machine made glass is large, you need to select a thicker size. Otherwise, the manufacturer will not. This method is produced, or even if it is cold, it is as thin as a piece of paper. Blowing bullets may be broken, and there is no way to ensure safety. Under normal circumstances, the thickness of painted glass is about 10mm, so the thickness can correspond to 2-3 meters long. Therefore, attention should also be paid to the selection of the size of painted glass.

The above is the Paint glass maintenance paint glass features we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> Paint glass maintenance paint glass features
We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send